Tape Measure Calibration Program

Lixer Tools recommends the use of a tape measure calibration tool to verify the accuracy of your tape measures. Purchasing a certified tape measure is just one step in the process. Because the end hook of the tape measure can be damaged or affected by various issues, we recommend frequently checking your tape measures against one of Lixer Tools calibration or inspection tools.

Issues that may affect accuracy of a tape measure include a bent end hook, worn rivets, or glue not cleaned from the end hook. Any time a tape measure has been dropped, it should be checked to make sure the end hook is not bent. Our calibration tools will help straighten a bent end hook. Our inspection tools will help identify any errors but do not have the end hook straightening slot.

Using a Lixer Tape Measure Calibration or Inspection Tool you can easily check the tape measure for accuracy at 10 cm or 6". Our tools allow you to check both the push and pull measurements of the tape measure.

We also recommend you keep a log indicating when your tape measures were checked. A free .pdf log can be downloaded below by clicking on the image then clicking on "(sample)" or you can contact us at info@lixertools.com to get a .pdf file or an excel file of the log.

For additional information on checking your tape measures, visit our helpful hints page.

1 Item(s)

Set Ascending Direction
per page

1 Item(s)

Set Ascending Direction
per page